I decided to swap the MDT ACC Elite chassis that my Vudoo Gen 1.2 was sitting in over to my Vudoo Three 60 (and moved the MPA Matrix Pro from the 360 to the Gen 1.2). I favor the feel of the ACC Elite chassis in my hands so I am going to try this out on the Three 60 as I shoot this more often thatn my Vudoo Gen 1.2.
So I made an early morning, pre-work range trip to rezero the rifle after swapping chassis. Zero would usually be the same from stock to stock, chassis to chassis, and in between. However, I did also move the scope forward by simply taking the one-piece mount off the scope rail and moving it forward a couple Picatinny slots. This is because I have the MDT ACC Elite setup with a shorter length of pull than the MPA Matrix Pro.
Date: 27 March 2024 Range: West End Gun Club (Meyers Canyon, CA) I took a Wednesday off from work to do a run-through of the April 2024 NRL22 Course of Fire. The April 2024 COF appears to be low to moderately difficult and is a good intro match for anyone…
I have been using Masterpiece Arms chassis systems for several years as the MPA BA Competition chassis was arguably one of the best chassis options on the market in the mid to late 2010s. While the BA Comp chassis had a lot going for it, I have always wanted to…
Date: 27 April 2025 Range: West End Gun Club (Meyers Canyon, CA) On 27 April 2025 we held the April 2025 NRL22 match at the West End Gun Club. We had 29 total competitors for a pretty full house and quite a few new NRL22 competitors. The morning was a…
Comment on this post